DECORA DELUXE is a Spiver interior decorative acrylic paint with a soft pearlescent glow and delicate coloured flakes. It creates an expressive yet refined wall finish: the matte base remains visually deep and “alive”, while light reveals subtle pearl reflections and tonal accents.
The finish is ideal for interiors where elegance, light and individuality matter: living rooms, bedrooms, hallways, offices, boutiques, restaurants, beauty salons and other commercial spaces. Depending on the colour, lighting and application technique, DECORA DELUXE can look soft and understated or rich and statement-making.
Why choose DECORA DELUXE
Creates a refined pearlescent effect without excessive shine
Contains decorative coloured flakes that add visual depth and dimension
Matte finish with soft light reflections
Suitable for modern, classic and commercial interiors
Ready to use: no dilution required
The surface can be washed approximately 3 weeks after application
Non-flammable and highly vapour-permeable
Solvent-free, with no lead pigments or lead chromates; formulated with acrylic copolymers, organic and inorganic pigments, and special non-toxic additives
Technical specifications
|
| Type of material | Interior decorative acrylic paint |
| Effect | Pearlescent, with decorative coloured flakes |
| Finish | Matte |
| Coverage | Approximately 9–10 m²/l of the ready mix |
| Packaging | 2 l |
| Application | DECORA SPALTER brush; optional further modelling with the DECORA trowel |
| Touch-dry time | About 4–5 hours |
| Full drying | 24–48 hours at 20 °C |
| Application temperature | From +8 °C to +30 °C |
| Dilution | Not required |
| Shelf life | Up to 24 months in intact packaging, protected from temperature fluctuations |
Technical data is based on the manufacturer’s documentation. Actual coverage may vary depending on surface preparation, application technique, colour and the applicator’s experience.
Surface preparation and application
For a clean, high-quality decorative finish, the surface must be even, dry, sound and clean. Fill and smooth any imperfections, then prime the wall with FISSATIVO UNIVERSAL, diluted with water at a ratio of 1:5 to 1:10 depending on the substrate’s absorbency. Once dry, apply 1–2 coats of tinted PRIMER S, allowing at least 4–5 hours between coats
Before application, add 600 ml of ARTHE PERLA to 2 L of the DECORA DELUXE base and mix thoroughly by hand. Apply the prepared mixture with a brush, distributing the decorative flakes evenly. After approximately 30–40 minutes, the surface can be further modelled with a special trowel to create the characteristic texture and direction of the pearl reflections. The working time of the prepared mixture is approximately 15 days
Read the DECORA DELUXE instructions
